Rheem-Ruud Furnace Draft Inducers
THESE PICTURES ARE NOT RHEEM/RUUD INDUCERS AND ARE FOR DESCRIBING THE DISCHARGE ONLY!
Identify YOUR Furnace Draft Inducer
 |
A typical left discharge inducer |
 |
A typical right discharge inducer |
RHEEM/RUUD DRAFT INDUCER ASSEMBLIES
DIRECT FROM RHEEM/RUUD
0809/0I R.T.V. High Temperature Silicone Sealant Used to seal furnace inducers and as a fire stop on flue pipes between floors and roofs. Note: If you are ordering a Fasco replacement Inducer please order this as the Fasco Inducers usually do NOT come with a gasket, so if you can't salvage your existing gasket, you will need this to make a new gasket!
51-21964-11 Rheem-Ruud Draft Inducer Kit As found in old package unit Models RCG-UGC, REG-UEG, RGG,UGG
First produced in 1989.
70-100612-01 Rheem-Ruud Furnace Draft Inducer Fits Rheem/Ruud Models: RGRK, UGRK 90% (2) STAGE UPFLOW
70-101087-81 Rheem-Ruud Furnace Draft Inducer Fits Rheem/Ruud Models: RGLJ, UGLJ, RGPH, UGPH, RGPN, UGPN, RGPP, UGPP RIGHT DISCHARGE (viewed from motor) SPARK IGNITION AND HOT SURFACE IGNITION SYSTEMS.
Rheem - Ruud Inducer 70-101087-81- Replaces old inducer numbers 70-101087-01, 70-24178-01, 70-24175-01 and 70-24175-81. For Spark Ignition or Hot Surface Ignition systems.
70-21496-83 Rheem-Ruud Furnace Draft Inducer Fits Rheem/Ruud Models: RGVB, UGVB, RGYB, UGYB HORIZONTAL RIGHT DISCHARGE (viewed from motor)
Call us with Model and Serial number if yours is a left discharge!
Order Rheem Ruud Inducer 70-21496-83, replaces 70-21496-03, 70-21496-01
70-22436-01 Rheem-Ruud Furnace Draft Inducer Rheem-Ruud Gas Furnace Draft Inducer for:
Rheem RGEB-07 and Ruud UGEB-07. Fasco model # A242, Fasco Part number (7021-7150). Also found in the following model numbers: RGEB-07EEGS, RGEB-10EEGS, UGEB-07EEGS, UGEB-10EEGS, WGEB-07EEGS, WGEB-10EEGS and GZUA75D3.
70-24033-01 Rheem-Ruud Furnace Draft Inducer 70-24033-01 Furnace Draft Inducer
Replaces The Following Rheem - Ruud Part Numbers:
70-24033-81, 70-24357-01
Used In The Following Rheem Model numbers:
RGRA, RGRJ, RGSA, RGTA, RGTC, RGTJ, 90RJ, 90RS, 90TJ, 90TS, RGRS, RGTS
Used In The Following Ruud model numbers:
UGRA, UGRJ, UGSA, UGTA, UGTC, UGTJ, UGRS, UGTS
Fasco numbers: Part number 7062-5177 Model number A136
Discharge: Right
Voltage: 120
70-24157-03 Rheem-Ruud Furnace Draft Inducer Fits Rheem/Ruud Models: RIGHT DISCHARGE (viewed from motor) RGDJ, UGDJ, RGLH, UGLH, RGLJ, UGLJ, RGPJ, UGPJ WITH HOT SURFACE IGNITION (ALL SIZES EXCEPT RGPJ, UGPJ, 05 EAUER, RGLJ, UGLJ, 05 EAUER 14" CABINET). If you have a 14" cabinet with RGPJ, UGPJ, 05 EAUER, RGLJ, UGLJ, 05 EAUER please call us with your full model and serial number as you may need a pressure switch installed if none is present.
Rheem-Ruud Standing Pilot Inducer OR Hot Surface and Spark Ignition Systems 70-24157-03 replaces 70-24175-01, 70-24175-03.
70-24206-01 Rheem-Ruud Furnace Draft Inducer 70-24206-01 Draft Inducer:
Fasco Part number: 7062-3925
Found in the following Rheem Model numbers:
RGGD-06EMCKS, RGGD-07EMCKS, RGGD-09EZCMS, RGGD-10EZCMS
RGJD-06(E/N)MCKS, RGJD-07(E/N)MCKS, RGJD-09(E/N)ZCMS, RGJD-10(E/N)ZCMS
RGFD-All
RGGE-All
RGJF-06(E/N)MCKS, RGJF-07(E/N)MCKS, RGJF-09(E/N)ZCMS, RGJF-10(E/N)ZCMS
Found in the following Ruud Model numbers:
UGGD-06EMCKS, UGGD-07EMCKS, UGGD-09EZCMS, UGGD-10EZCMS
UGJD-06(E/N)MCKS, UGJD-07(E/N)MCKS, UGJD-09(E/N)ZCMS, UGJD-10(E/N)ZCMS
UGFD-All
UGGE-All
UGJF-06(E/N)MCKS, UGJF-07(E/N)MCKS, UGJF-09(E/N)ZCMS, UGJF-10(E/N)ZCMS
Replaces 70-24206-81
This is a (2) stage inducer.
Discharge: Right as viewed from the motor.
Voltage: 120
70-24206-02 Rheem-Ruud Furnace Draft Inducer (2) stage
Discharge: Right
Voltage: 120
Found in the following Rheem furnaces:
RGGD, RGJD and RGJF.
Found in the following Ruud furnaces:
UGGD, UGJD and UGJF
70-42241-01 Rheem-Ruud RRGF/URGF Package Unit Draft Inducer Rheem/Ruud Inducer Pt # 70-42241-01 Used in Model (R and U) RGF 2501 50 CKR Package Units.
70-42278-02 Rheem-Ruud Furnace Draft Inducer (As used in Rheem/Ruud RRGF, URGF Package Units)
703001 Rheem-Ruud Furnace Draft Inducer 703001
Replaces:
70-100542-01,70-24324-01,70-24324-02,70-100542-02 and 70-24319-01.
(2) speeds
Discharge: Right
Housing: Metal
Voltage: 120
Found in the following Rheem and Ruud furnace models:
RGLK,UGLK, RGPK,UGPK, RGLK,UGLK, RGPK,UGPK, RGLK,UGLK, RGLL,UGLL, RGPK,UGPK and RGPL,UGPL.
A079 Fasco Inducer for Rheem-Ruud and Goodman
A090 Fasco Rheem-Ruud Draft Inducer A090 Fasco Rheem-Ruud Draft Inducer HP: 1/45 Amps: 1.10 Volts: 115 RPM: 3000 Rotation from shaft end: CW Bearings: sleeve Replaces the following part numbers: Rheem-Ruud 70-21496-01, Fasco 7021-5239 and JA1M102
A136 Fasco Rheem-Ruud Inducer Replaces Fasco number 7062-3861
A241 Fasco Rheem-Ruud Draft Inducer A241 Fasco Rheem-Ruud Draft Inducer HP: 1/50 Amps: 0.62Volts: 208-230 Rotation from shaft end: CW RPM: 3200 Bearings: sleeve Right discharge, replaces Rheem-Ruud part number 70-23641-81
Rheem/Ruud RGEA/UGEA Upflow 90% Condensing Furnace Inducer There are (2) different versions used on this furnace. Please read the product descriptions carefully before ordering.
